|
|
 |
Detailed
PrintStar Max Specifications
|
|
| |
|
PrintStar Max Printing System Components
Controller
cabinet
Ink delivery
system
Up to
6 printheads and printhead mounting brackets
Printhead
data cables and ink line kits
Photocell product sensor and photocell mounting
bracket
Industrial-strength
hand-held input device
|
|
|
PrintStar
II Printing System Specifications
| Print
Type- |
Large
character dot matrix ink jet printing system |
| Printhead
Options- |
Users
have the option to use up to:
- Six
V-1600 Series Printheads, or
- Six
V-1600HD Series Printheads
|
Character
Sizes- |
V-1600
Series Printheads
(16-channel
dot matrix characters) |
•
1.75" (4.45cm) at 100% 16 dot height, 0.70"
(1.77cm) at 40% 7 dot height, or 0.46" (1.16cm)
at 26% 5 dot height with split-line capability to print
two lines of text
• 1.0" (2.54cm) at 100% 16 dot height, 0.40"
(1.01cm) at 40% 7 dot height, or 0.27" (0.68cm)
at 26% 5 dot height with split-line capability to print
two lines of text |
V-1600HD
Series Printheads-(32-channel
hi-definition characters) |
•
1.75" (4.45cm) at 100% 16 dot height, 0.70"
(1.77cm) at 40% 7 dot height, or 0.46" (1.16cm)
at 26% 5 dot height with split-line capability to print
two lines of text |
| Character
Set- |
61 character ASCII set |
| Print
Speed- |
20
feet/minute (6.1m/minute) to 200 feet/minute (61m/minute)
line speed |
| Message
Length- |
128-character
length per message per board pack; 128 memory locations |
| Communication- |
RS-232C,
9600 baud, 8 data bits, 1 start, 1 stop, asynch
|
| Software
Features- |
Counter,
lot counter, 24-hour clock, 8-or 12-hour programmable
shift code, Julian date, 3-letter month name, 3-letter
weekday name, expiration date, expiration month, expiration
day, expiration year, expiration Julian date |
| Operating
Features- |
Dot
size, print delay, character width, character boldness,
photocell on/off/repeat/encoder input, invert print, reverse
print, purge routine |
| Encoder
Output- |
Resident
software allows communication with shaft encoder
|
| Component
Modularity- |
Eliminates
the need for costly service calls and minimizes downtime;
printheads and components can be replaced in less than
5 minutes |
| Printhead
Dimensions- |
2.5"
(6.4cm) H x 1.5" (3.8cm) W x 7" (17.8cm) L;
dimensions are for the printhead only—an additional
3" (7.6cm) is needed for the ink line and printhead
cabling |
| Product
Sensor- |
Diffuse
beam photocell (20v) or hardware sinking signal, other
photocell options available upon request |
| Electrical
Requirements- |
90
- 240 VAC, 50/60Hz, 8 amp |
| Cabinet
Construction- |
Industrial-gauge-coated
steel |
| Operating
Environment- |
30°F
(0°C) to 122°F (50°C) |
| Substrate
Capabilities- |
Porous
or non-porous substrate printing capability, specify at
time of order |
| Ink
Volume- |
5-gallon
(18.93 liter) pail or 17-gallon (64.35 liter) returnable
container |
|
|
PrintStar
II Optional Accessories
| |
|
| Spare
Parts Kit- |
Includes
spare printhead, board assembly, data cable, ink line
kit and master cap |
| Starter
Kit- |
Includes
ink, cleaner for flushing the system, spray bottle for
cleaner, hand cleaner, printhead wipes and 70mm cap
wrench |
| PC
Software- |
Communications
software for PC integration |
| Encoder
Output- |
Allows
operation with variable-speed conveying systems |
| Bar
Code Laser Scanner- |
Allows
scan and print message retrieval |
| Low
Ink Light Beacon- |
Flashing
beacon notifies users of low-ink situations |
| Turbo-Dri
Drying System- |
Facilitates
quick drying on non-porous surfaces |
| Floor
Stand- |
Includes
mounting bracket and legs with leveling feet, 57"
(1.5m) total height |
| Installation
and Training- |
On-site
installation and training available anywhere in the U.S. |
|
|
|
