Cement
Video
(2.24
mb)
|
Cement
Bags
Leaders’s Printstar is designed to handle
the hostile environment that cement packaging operations
offer. Durable Printstar printheads and ink options
handle the dust particles that fill the air and
allow quality printing up to 2” from the surface
of the bag.
Ceiling Tiles
Leader ’s Printstar complies with manufacturers’
needs to print product identification, lot numbers
or other information on the back side of individual
ceiling tiles or packages of tiles. Users choose
between a variety of Printstar single-head or dual-head
configurations to get the job done.
|
| |
Floor
Tiles
Many manufacturers choose ink jet printing systems
over labeling systems to mark tiles because of the
thickness each label adds. Leader printing systems
are used to print product ID, lot numbers or other
permanent information on the back side of tiles.
|
| |
Gypsum
Board, Wall Board, OSB
Leader’s Printstar printing systems and inks
offer a proven combination for printing product
ID and lot number information on these products.
Our LD-60GB is specially designed for gypsum board
applications to allow water-based paints to cover
the mark once the board is installed. |
| |
Insulation
Printing continuously on a stream of insulation
can be a problem for most ink jet printing systems.
Leader’s Printstar is designed to handle the
rigors of printing non-stop in an environment where
insulation particles float freely throughout the
air. |
| |
Shingles
Printing on bundles of shingles is an easy application
for most ink jet printers. But what happens when
the bundles sit outside in a lumberyard, exposed
to rain and sunlight? Leader’s LD-60LF is
a water-fast, lightfast ink resistant to moisture
and fading and offers the perfect solution for this
application. |
